Overview
Bredel hose pumps have no valves or seals to leak, clog or replace and provide flow rates to 108,000 litres/hour and pressures to 16bar.
They can pump viscous and abrasive slurries, pastes and sludge, with up to 80% solids in suspension.
- Suction lift capability of up to 9.14m (30ft)
- Dry running and self-priming
- Abrasion resistant hoses can double pump uptime and save energy
- No seals, ball-checks, diaphragms, glands, immersed rotors, stators or pistons to leak, clog, corrode or replace
- Handles abrasive slurries, corrosive acids, gaseous liquids
- No slippage, allowing true positive displacement for accurate and repeatable metering
- No ancillary equipment, check valves, sealing water flush systems or run-dry protection required
- Fully reversible to blow out suction and drain lines safely
- DuCoNite® pump with electroplated finish for aggressive chemical environments
Bredel range
Bredel pumps reliably handle a variety of harsh materials, including abrasive sludge, paste and slurries.
Unlike other pump types, the highly abrasive nature of grit-filled sludge or lime slurry in the environmental market, does not affect peristaltic hose pump life.
Bredel hose pumps eliminate ancillary equipment such as dry run protection, seal water flush systems and in-line check valves. They are also reversible to flush lines
| Model | Bredel 10 | Bredel 15 | Bredel 20 | Bredel 25 | Bredel 32 |
| |
Datasheet download |
Datasheet Download |
Datasheet Download |
Datasheet Download |
Datasheet Download |
| Max. flow (L/h) |
145 |
525 |
820 |
2,740 |
5,250 |
| Capacity (L/rev) |
0.022 |
0.083 |
0.152 |
0.300 |
0.625 |
| Max. discharge pressure (bar) |
12 |
12 |
10 |
16 |
16 |
| Max. temp. (C) |
80 |
80 |
80 |
80 |
80 |
| Inner diameter pump element (mm) |
10 |
15 |
20 |
25 |
32 |
| Port size (with 150# flange) |
0.5" NPT * |
0.75" NPT * |
0.75" NPT * |
1" |
1.5" |
| Lubricant required (L) |
0.25 |
0.5 |
0.5 |
2 |
3.5 |
| Starting torque (Nm) |
47 |
60 |
85 |
115 |
210 |
| Approximate weight of pumphead (kg) |
12.2 |
18.5 |
18.5 |
39 |
58.5 |
| CIP version available |
- |
- |
- |
- |
- |
| Accessories |
- |
- |
- |
- |
- |
| Model | Bredel 40 | Bredel 50 | Bredel 65 | Bredel 80 | Bredel 100 | Bredel 280 | Bredel 2100 |
| |
Datasheet download |
Datasheet download |
Datasheet download |
Datasheet download |
Datasheet download |
Datasheet download |
Datasheet download |
| Max. flow (L/h) |
9,600 |
17,500 |
32,200 |
39,100 |
52,900 |
78,000 |
108,000 |
| Capacity (L/rev) |
1.33 |
2.92 |
6.7 |
11.7 |
20.0 |
23.4 |
40.0 |
| Max. discharge pressure (bar) |
16 |
16 |
16 |
16 |
16 |
16 |
16 |
| Max. temp. (C) |
80 |
80 |
80 |
80 |
80 |
80 |
80 |
| Inner diameter pump element (mm) |
40 |
50 |
65 |
80 |
100 |
80 |
100 |
| Port size (with 150# flange) |
1.5" |
2" |
2.5" |
3" |
4" |
3" |
6" |
| Lubricant required (L) |
5 |
10 |
20 |
40 |
60 |
80 |
120 |
| Starting torque (Nm) |
320 |
620 |
1,150 |
2,000 |
3,100 |
3,400 |
5,300 |
| Approximate weight (kg) |
121 |
227 |
398 |
627 |
1,032 |
1,344 |
2,064 |
| CIP version available |
Yes |
Yes |
- |
- |
- |
- |
- |
| Accessories |
- |
- |
- |
- |
- |
Cover lifting device |
Cover lifting device
|
Manuals
Bredel Manuals
Bredel 10-20 Bredel 25-32 Bredel 40-100 Bredel 265-2100
DuCoNite Manuals
Bredel 10-20 DuCoNite Bredel 25-32 DuCoNite
CIP Manual
Bredel CIP 40/50 Manual
Chemical compatibility
For the full list of chemical compatability please refer to the interactive guide 