Overview
730SN, 730UN, 730DuN 730BpN and 730EnN peristaltic process pumps fitted with LoadSure tube element pumpheads
- 730 range of peristaltic pumps offer four drive options, colour display and intuitive menu structure to provide visual status indication and minimal key presses.
- Flows up to 33 litre/min, 2bar (8.8 USGPM, 30psi) using LoadSure tube elements
- Industrial integration - manual, remote, Analog and digital communication, plus PROFIBUS
- Keypad incorporates 3-level security PIN lock
- IP66 (NEMA 4X) rated cased pumpsy
Control
| Pump drives | 730SN | 730UN | 730DuN | 730BpN | 730US | 730DuS | 730EnN |
| Manual control |
|
|
|
|
|
|
|
| Intuitive keypad and color display |
• |
• |
• |
• |
• |
• |
|
| Choice of flowrate or speed display |
• |
• |
• |
• |
• |
• |
• |
| Full calibration with choice of flow units |
• |
• |
• |
• |
• |
• |
• |
| MemoDose function |
• |
• |
• |
|
• |
• |
|
| Auto restart facility |
• |
• |
• |
• |
• |
• |
• |
| Guard switch detection |
• |
• |
• |
• |
• |
• |
• |
| Leak detection |
• |
• |
• |
• |
• |
• |
• |
| Remote control |
|
|
|
|
|
|
|
| Configurable Start/Stop, leak detector and pressure switch input via contact closure or 5V TTL or 24V industrial logic |
|
• |
• |
|
|
|
|
| Configurable Start/Stop, leak detector and pressure switch input via 110V industrial logic |
|
|
|
|
•
|
• |
|
| Configurable Start/Stop and leak detector input via contact closure or 5V TTL or 24V industrial logic Note: Does not include pressure switch |
|
|
|
|
|
|
• |
| Direction change and auto/manual toggle input via contact closure or 5V TTL or 24V industrial logic |
|
• |
• |
|
|
|
|
| Direction change and auto/manual toggle input via 110V industrial logic |
|
|
|
|
• |
• |
|
| Remote operation of MemDose (foot/hand-switch or logic input) |
|
• |
•
|
|
•
|
•
|
|
| Four configurable digital status outputs through 24V, 30W relays |
|
• |
• |
|
|
|
|
| Four configurable digital status outputs through 110V relays |
|
|
|
|
• |
• |
|
| Remote pressure/flow sensors |
|
|
|
|
|
|
•
|
| Analogue speed control |
|
|
|
|
|
|
|
| Fully configurable inputs; 0-10V or 4-20mA |
|
• |
• |
|
• |
• |
|
| Analogue outputs; 0-10V, 4-20Ma |
|
• |
• |
|
• |
• |
|
| Keypad/analogue input scaling (replacement of diaphragm pumps) |
|
|
• |
|
|
• |
|
| Tacho frequency output; 0-1478Hz |
|
• |
• |
|
|
|
|
| 2x sensor inputs 4-20ma* |
|
|
|
|
|
|
• |
| Security |
|
|
|
|
|
|
|
| 3-level PIN lock |
• |
• |
• |
• |
• |
• |
• |
| Network communication |
|
|
|
|
|
|
|
| RS485 network control |
|
|
• |
|
|
• |
|
| Digital pump commands (Profibus / EtherNet/IP) |
|
|
|
|
|
|
|
| Profibus DP V0 |
|
|
|
• |
|
|
|
| Communication speeds from 9.6kbit/s up to 12000kbit/s |
|
|
|
• |
|
|
|
| Baud Rate (MBPS) 10/100 Full/Half Duplex Operation |
|
|
|
|
|
|
• |
| Auto detect bus speed |
|
|
|
|
|
|
• |
| Speed set point |
|
|
|
• |
|
|
• |
| Speed feedback |
|
|
|
• |
|
|
• |
| Flow calibration function |
|
|
|
• |
|
|
• |
| Hours run |
|
|
|
• |
|
|
• |
| Revolution counter |
|
|
|
• |
|
|
• |
| Leak detection |
|
|
|
• |
|
|
• |
| Low fluid level alarm |
|
|
|
• |
|
|
• |
| Diagnostic feedback |
|
|
|
• |
|
|
• |
| EtherNet/IP |
|
|
|
|
|
|
• |
| Device Level Ring (DLR) |
|
|
|
|
|
|
• |
| Flow Totaliser |
|
|
|
|
|
|
• |
Performance
| |
|
LoadSure tube element bore and flow rates (litre/hr) |
| |
Speed (rpm) |
12.7mm |
15.9mm |
19.0mm |
25.4mm |
| 720R |
0.1-360 |
0.22-780 |
0.30-1100 |
0.42-1500 |
0.56-2000 |
Pumpheads
720RE and 720REX LoadSure tubing element pumpheads
- 720RE pumpheads accommodate 4.8mm-wall LoadSure tubing elements in two conformations: with PVDF Tri-clamp-style connectors for sanitary applications; and with industrial Cam-and-Groove connectors. Both are offered in four bore sizes: 12.7mm, 15.9mm, 19.0mm and 25.4mm, giving up to 2,000 l/hr (8.8GPM) 2,000 l/hr flow at up to 2bar (30psi) pressure.
- 720REX extension pumpheads offer identical performance, but at a maximum pressure of 1bar (15psi) .
Elements are available in Pumpsil platinum-cured silicone, Bioprene and STA-PURE PCS for sanitary applications; and in Marprene, Pumpsil and Neoprene for industrial use.
720R and 720RX continuous tubing pumpheads
- 720R pumpheads accommodate 4.8mm wall continuous tubing for joint-free flow from source to discharge. Available in five bore sizes: 9.6mm, 12.7mm, 15.9mm 19.0mm and 25.4mm, giving up to 2,000 l/hr (8.8GPM) flow at up to 2bar (30psi pressure).
- 720RX extension pumpheads offer identical performance, but at a maximum pressure of 1bar (15psi) .
Tubing is available in five materials for almost any chemical requirement.
Drives
- Simple-to use HMI requiring minimal key presses to reduce chances of costly errors. Flow proportional to pump speed over 3,600:1 control range. IP66 (NEMA 4X) cased pumps for washdown environments.
- 730SN simple, plug-in and switch on pumps offering economy of ownership. Ultimate process security with a 3 level PIN lock.
- 730UN - with all the features of the SN models, plus configurable inputs and outputs.
- 730DuN with configurable inputs and outputs, plus RS232 and RS484.
- 730BpN – IP66 Real time communication makes your process secure and flexible. Bus speed 9.6 kbits/s up to 12000 kbits/s connectivity
- 730EnN – IP66 EtherNet/IP connectivity for fast and easy access to pump data over Industrial Ethernet
Download datasheet
PROFIBUS
No point-to-point wiring and a simple 9-pin PROFIBUS D-connector provides:
- Two way communication for control and status feedback
- Pumps communicate at full PROFIBUS bus speed
- No additional gateways or I/O converters required
- Predictive maintenance
Profibus GSD control file