530 process pumps for tube elements, up to 2bar

530 REL element pumphead

Flow rates up to 3.5 L/min at 2 bar peak pressure

530REL element pumphead

REL LoadSure tube element peristaltic pumphead for up to 2 bar operation

Contact Us

To order this product please contact us on:

Tel: +353 (0) 21 4757030

You can also send us an email or find your nearest distributor.

Overview
Control
Performance
Drives
Tubing
Take a tour
Brochures
Datasheet
Manuals

Overview

530S and SN, 530U and UN, 530Du and DuN, 530Bp and BpN pumps fitted with REL LoadSure tube element pumphead for 0-2bar operation

530 range of process pumps offers four drive options, colour display and intuitive menu structures provide visual status indication and minimal key presses.

Flow rates from 0.04 ml/min to 3.5 L/min
Industrial integration – manual, remote, Analog and digital communication, plus PROFIBUS
Keypad incorporates 3-level security PIN lock
Robust pumphead construction with chemically-resistant polyphenylene sulphide track and rotor, and stainless steel rollers and bearings
530REL pumphead for use with quick-release industrial or sanitary Tri-clamp^® LoadSure^® elements for 2bar operation and one minute maintenance
S, U, Du and Bp pumps are IP31 cased pumps. SN, UN, DuN and BpN are IP66 cased pumps

Control

Pump drives	530S	530SN	530U	530UN	530Du	530DuN	530Bp	530BpN	530US	530DuS	530En	530EnN
Manual control
Intuitive keypad and color display	•	•	•	•	•	•	•	•	•	•	•	•
Choice of flowrate or speed display	•	•	•	•	•	•	•	•	•	•	•	•
Full calibration with choice of flow units	•	•	•	•	•	•	•	•	•	•	•	•
MemoDose function	•	•	•	•	•	•			•	•
Auto restart facility	•	•	•	•	•	•	•	•	•	•	•	•
Leak detection	•	•	•	•	•	•	•	•	•	•	•	•
Remote control
Configurable Start/Stop, leak detector and pressure switch input via contact closure or 5V TTL or 24V industrial logic		•	•			•	•		•	•	•	•
Configurable Start/Stop, leak detector and pressure switch input via 110V industrial logic		•	•			•	•		•	•	•	•
Configurable Start/Stop and leak detector input via contact closure or 5V TTL or 24V industrial logic Note: Does not include pressure switch		•	•			•	•		•	•	•	•
Direction change and auto/manual toggle input via contact closure or 5V TTL or 24V industrial logic		•	•			•	•		•	•	•	•
Direction change and auto/manual toggle input via 110V industrial logic		•	•			•	•		•	•	•	•
Remote operation of MemDose (foot/hand-switch or logic input)		•	•			•	•		•	•	•	•
Four configurable digital status outputs through 24V, 30W relays		•	•						•	•	•	•
Four configurable digital status outputs through 110V relays		•	•						•	•	•	•
Software configurable logic outputs			•		•
Remote pressure/flow sensors											•	•
Analogue speed control
Fully configurable inputs; 0-10V or 4-20mA		•	•			•	•		•	•	•	•
Analogue outputs; 0-10V, 4-20Ma			•	•	•	•			•	•
Keypad/analogue input scaling (replacement of diaphragm pumps)					•	•				•
Tacho frequency output; 0-991Hz			•	•	•	•
2x sensor inputs 4-20ma*											•	•
Security
3-level PIN lock	•	•	•	•	•	•	•	•	•	•	•	•
Network communication
RS485 network control						•				•
RS232 network control					•
Digital pump commands (Profibus / EtherNet/IP)
Profibus DP V0							•	•
Communication speeds from 9.6kbit/s up to 12000kbit/s							•	•
Auto detect bus speed							•	•			•	•
Speed set point							•	•			•	•
Speed feedback							•	•			•	•
Flow calibration function							•	•			•	•
Hours run							•	•			•	•
Revolution counter							•	•			•	•
Leak detection							•	•			•	•
Low fluid level alarm							•	•			•	•
Diagnostic feedback							•	•			•	•
EtherNet/IP							•	•			•	•
Device Level Ring (DLR)											•	•
Flow Totaliser							•	•			•	•
Baud Rate (MBPS) 10/100 Full/Half Duplex Operation							•	•			•	•

Performance

LoadSure® Element tubing flow rates (ml/min)
Tube material	Speed	3.2mm	6.4mm	9.6mm
Pumpsil®, GORE® STA-PURE® Pump Tubing – Series PCS, GORE® STA-PURE® Pump Tubing – Series PFL, Neoprene	0.1 to 220rpm	0.18-390	0.70-1500	1.6-3500
Marprene TL, Bioprene TL	0.1 to 220rpm	0.17-370	0.67-1500	1.5-3300

Drives

Simple-to use HMI requiring minimal key presses to reduce chances of costly errors. Flow proportional to pump speed over 2,200:1 control range. IP31 and IP66 cased pumps for washdown environments.

530S - IP31 and 530SN - IP66 are simple, plug-in and switch on pumps offering economy of ownership. Ultimate process security with a 3 level PIN lock.

530U - IP31 and 530UN - IP66 with all the features of the S/SN models, plus configurable inputs and outputs.

530Du - IP31 and 530DuN - IP66 with configurable inputs and outputs, plus RS232 and RS484.

530Bp - IP31 and 530BpN - IP66 Real time communication makes your process secure and flexible. Bus speed 9.6 kbits/s up to 12000 kbits/sconnectivity

530En – IP31 and 530EnN – IP66 EtherNet/IP connectivity for fast and easy access to pump data over Industrial Ethernet

Tubing

Please refer to datasheets for materials and sizes of continuous tubing and tube elements for each pumphead model.

Pumpsil platinum cured silicone tubing		Laser-etched part number, lot number and use-by-date accuracy Certification USP Class VI, FDA regulations 21 CFR177.2600 for contact with food -20C to 80C
Bioprene thermoplastic tubing		Fully approved for food and pharmaceutical applications Low permeability 5C to 80C
PureWeld		Low internal spallation ADCF -20C to 80C
Marprene long life process tubing		Exceptional long life Wide chemical compatibility, especially resistant to oxidizing agents 5C to 80C, up to 7bar
GORE STA-PURE PCS reinforced silicone tubing		Longest available peristaltic tube life Virtually no spallation -20C to 80C, to 7bar
GORE STA-PURE PFL reinforced fluoroelastomer tubing		Extreme chemical resistance 50 times longer life than other fluoroelastomers -20C to 80C, to 4bar
Neoprene industrial application tubing		Handles abrasive slurries Up to 2bar 0C to 80C